This is for a brand new
3G Phone Signal
for use in
Telstra Next G Networks
(for enabling 3G Mobile Phone
Network Access from areas with poor
indoor network coverage)
(Please read the entire listing
Have you experienced with
poor cellular network coverage?
Do you want to increase the 3G signal strength at your premises?
Kit can be used in Australia for Telstra's Next G Networks.
The 70 dB cell phone
repeater system is a complete
low-cost solution for boosting 3G signals for areas inside your home, office or any indoor
location where you need a stronger
The kit helps
to Improve the Australian Telstra Next G coverage of your Next G phone, router /
modem, or handheld device such as an Apple iPad, it comes with a
high-performance 11dB gain Yagi type Next G antenna. Designed for use in country
or fringe areas of the NextG network where cells are few or signals are weak.
This wireless amplifier works in any inside location where improved
cellular signal is needed: homes,
offices, buildings. It greatly reduces disconnects and drop-outs and can be used with
multiple cell phones and data cards
It is a complete package with everything you need is in the box. It
features wireless operation with
no connection to cell phone or data card and Power control logic that ensures maximum output
power is within cellular
How Does the Cellular Repeater
works with two antennas (included). The indoor antenna communicates with your cell phone or
laptop data card, and the outdoor
antenna communicates with the cell tower.
The included directional outdoor cellular
antenna is designed for
installation outside on a wall or a pole, or inside on a window or wall, depending on your
preferred configuration. The
antenna receives the outside signal and sends it through the coax cable to the amplifier
unit, where it is amplified and
retransmitted much more strongly through the indoor antenna into the room.
indoor antenna picks up a signal
from your cell phone or data card, the amplifier boosts that signal and transmits it through
the cable to outdoor antenna and
back to the cell site. (Note: the Amplifier kit will only operate if there is adequate
signal to amplify). The better the
outside signal, the more coverage from the inside antenna.
How Large An Improved
Cellular Signal Coverage Area?
The 70dB amplifier kit was scaled for areas
such as an office up to 500 square
meter (1,700 square feet). With a very good outside signal, improved cellular coverage
may be found in several rooms
closest to the desktop antenna. For larger areas, contact us for other larger
Important Note: If, outside
the building, your signal is very weak (less than 2-3 bars) or non existent, the amplifier
will most likely not be effective.
Use a directional high gain antenna instead.
* Amplifies signals to and from cell site
* Greatly reduces
disconnects and drop-outs
* Works on Telstra's 3G Next Generation G Networks in Australia
multiple phones/data cards
* Significantly improves
voice and data signal quality
* Increases data communication rates
* Automatic power
* Extends cell phone battery life
* Easy to install and use, and it's
* Up to 10 times more
powerful than your cell phone
The amplifier kit
70 dB Cellular Signal Amplifier Unit
* Outdoor / Window Directional 11 dB Antenna
2.5 dB Omni-Directional Indoor
* Two lengths RG6 Cable, 10 & 5 meter
* All Mounting Hardware
Power Supply (220V /
Each Amplifier Kit contains an amplifier, an outdoor/window directional 11
dB antenna, omni-directional
inside antenna, two lengths of RG6 cable (10 & 5 meter), all mounting hardware, AC power
supply and installation
1. Coverage: 500 sq. m. (1,700 sq.
2. Output Power: Up
Link: 45dBm, Down Link:
3. Gain: Up Link: 60dB, Down Link: 70dB
4. In-band Ripple: <=3
5. Group Delay:
6. Spurious Emission of Out-band: <= -40dBm
7. Impedance: 50
8. Input Power: AC 220V /
9. Working Temperature: -25oC to +55oC
10. Humidity: 5%
Connectors: F Female
12. Effective Gain with
antennas included: 83.5
repeater system installation setup guide
Your Amplifier Kit works
by picking up a stronger signal
from an antenna mounted on a pole or wall outside your building or high on a window inside
your building, facing the cell
site. The amplifier then increases the signal and transmits it through the onboard antenna
on the amplifier to your cell
phone or laptop data card.
Before you install the amplifier kit, it is very important
that you determine the location
of the best available cellular signal. This will affect where you place the cradle antenna
and will help you get the best
performance from your system.
You will find the strongest signal outside your house
or building, at the highest place
available. Your cell phone can help you find the strongest outside signal, using any or all
of the following
1. Place calls from several locations outside your building and note where
you get the best
2. Check the bar
indicator on your cell phone display
and note where the signal appears to be the strongest. Note: cell phone bars are only an
approximation of signal strength and
vary from phone to phone. They can take up to 30 seconds to reset to a new reading. Be
patient and repeat your signal check
3. Some cell phones have
test modes for reading accurate
signal strength. Using the test mode on your cell phone, move around the outside of your
building and determine the location
of the strongest signal. Once you have determined where the outside signal is strongest, you
should plan to install the
cradle antenna in that general area, either outside or inside.
1. What kind of improvement in cell phone performance can I expect with
the Amplifier Kit?
amplifier kit's performance will depend somewhat on the strength of the cellular
signal outside your home or building.
However, if you install the amplifier in accordance with the instructions, you can expect a
significant improvement in your
ability to use your cell phone or cellular data card indoors.
2. Where should I
install my repeater to get the best
You should install the amplifier in the area where you most need an
improved signal. The farther you are
from the amplifier, the less improvement you will experience. It is also important to
install the outside antenna in a
location where you have the strongest outside signal. Also keep in mind the distance between
the amplifier and the outdoor
antenna. You will need at least 20 feet of separation to prevent the start of unstable
oscillation, but you will probably
want to stay within the 50 foot length of the coax cable. We have additional optional cable
and the necessary connectors /
splitters should you need to install more than one indoor antenna to cover more areas, but
using more cable will result in
some signal loss.
3. I have a 1800MHz phone ˇV will the Amplifier boost that
The Amplifier is
designed to work with the 3G bands of Telstra networks in Australia. We offer specific amplifiers for other
4. Can I use my own
cable for my installation?
The low loss RG6 cable included with your product has been
specifically selected for the
Amplifier kit. Use of another type or longer length of cable will likely degrade the systemˇ¦
s performance. Contact us to
tailor a cable for you should you require longer cable length.
5. Can I use
different antennas than the ones
supplied in the box?
Yes! The amplifier kit is designed to give you reliable signal
improvement with the included
antennas. We offer optional GSM antennas and accessories that enable you to customize your
amplifier kit to your specific
6. There are many people using cell phones in my office at the same time ˇV
will the Amplifier improve the
signal for all of them?
Absolutely! The Amplifier kit is designed to support multiple
users simultaneously (within the
range of the indoor antenna).
- Flat rate shipping already included in
the price for world-wide
delivery by air parcel.
Damaged or defective merchandise
must be reported within 7 days. You simply send the item back to us and we will replace it
absolutely free (buyer is
responsible for all return shipping costs and insurance).
We will guarantee the item for
days after delivery. If the item malfunctioned or broke under normal usage we will replace
it free of charge. Returns
must have all original packaging and accessories otherwise it will not be
entertained. You simply send the item back
to us (please email us before sending the item) and we will replace it absolutely free
(buyer is responsible for all return
shipping costs and insurance).
Please email us if you have any
questions before bidding!
order now to own this